Table of Contents
Advertisement
Ensuring functional safety
3.1
Fundamental safety instructions for Safety Integrated
Risk minimization through Safety Integrated
Safety Integrated can be used to minimize the level of risk associated with machines and
plants.
Machines or plants, however, can only be operated safely in conjunction with Safety
Integrated if the machine manufacturer
• is familiar with and observes all aspects of this technical user documentation, including
• carefully installs and configures the machine or plant and verifies this through an
• implements and validates all the measures required by the machine or plant risk analysis
The deployment of Safety Integrated does not replace the machine or plant risk assessment
by the machine manufacturer as stipulated by the EU Machinery Directive.
In addition to deploying Safety Integrated Functions, further risk reduction measures must
be implemented.
Unexpected movement of machines caused by inactive safety functions
Inactive or unadjusted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
• Observe the information in the appropriate product documentation before
• Carry out a safety inspection for safety-relevant functions on the entire system, including
• Ensure that the safety functions used in your automation and drive tasks are adjusted
• Run a function test.
• Only put your plant into live operation once you have ensured that the safety-relevant
SIMOGEAR 2332 - Safety-related brake
Operating Instructions, 11/2021, A5E51390096A/RS-AA
DANGER
the documented constraints, safety instructions and residual risks,
acceptance test carefully performed and documented by qualified personnel,
based on the programmed and configured Safety Integrated Functions or by other
means.
WARNING
commissioning.
all safety-related components.
and activated through appropriate assignment of parameters.
functions are running correctly.
3
25
Advertisement
Table of Contents
