Table of Contents
Advertisement
Introduction
• Transporting and storage
• Disposal
You can find additional information in the relevant Configuration Manual.
This documentation describes the functionality of the product. The machine builder
documents any modifications or changes to the product made by it.
This documentation cannot contain all of the detailed information on all of the product types.
Moreover, this documentation cannot take into consideration every possible type of
installation, operation, and maintenance.
Text features
In addition to the notes that you must observe for your own personal safety as well as to
avoid material damage, in this document you will find the following text features:
Operating instructions
Handling instructions with a specified sequence start with the word "Procedure":
The individual handling steps are numbered.
1. Execute the operating instructions in the specified sequence.
❒
The square indicates the end of the operating instruction.
Operating instructions without a specified sequence are identified using a bullet point:
• Execute the operating instructions.
Enumerations
• Enumerations are identified by a bullet point without any additional symbols.
– Enumerations at the second level are hyphenated.
Notes
Notes are shown as follows:
Note
A Note is an important item of information about the product, handling of the product or the
relevant section of the document. Notes provide you with help or further suggestions/ideas.
4
SIMOGEAR 2332 - Safety-related brake
Operating Instructions, 11/2021, A5E51390096A/RS-AA
Advertisement
Table of Contents
