Table of Contents
Advertisement
General information and safety instructions
2.2 Copyright
2.2
Copyright
The copyright to these operating instructions is held by Siemens AG.
These operating instructions must not be wholly or partly reproduced for competitive
purposes, used in any unauthorized way or made available to third parties without
agreement of Siemens AG.
2.3
Intended use
SIMOGEAR geared motors with safety-related brake has a signal yellow marking (Safety
Integrated) on the fan cover.
The brake is stamped as LS on the rating plate.
Figure 2-1
The safety-related brake is suitable for use in
the following environment
Plants and systems whose safety is evaluated and
designed to be in compliance with EN 61800-5-2
and/or EN ISO 13849-1 and EN ISO 13849-2
Typical industrial environment
e.g. indoor installation for conveyor technology
The safety-related brakes are intended for use in plants machines and systems. Operate the
safety-related brakes under the specified application conditions, and never outside the
specified power limits. The technical data are part of the correct and intended use. Other uses
or uses that go beyond this are not permitted. Carefully observe the information relating to
configuring brakes.
22
Marking for functional safety
The safety-related brake is not suitable for use
in the following environment
Use in hazardous areas
Harsh industrial environments
e.g. offshore or the chemical industry
Areas with direct exposure to seawater or splash
seawater
SIMOGEAR 2332 - Safety-related brake
Operating Instructions, 11/2021, A5E51390096A/RS-AA
Advertisement
Table of Contents
