4.2
Switchon
As soon as the PCE-TDS 75 is connected to a power source, it starts automatically and the
system runs automatically according to the parameters last entered. After *R is displayed in the
upper right corner, the instrument will automatically start measuring.
If this is the first use or installation at a new location, you must enter the parameters of the new
installation location. All parameters set by the user are permanently saved until changed. The
flow meter will continue to measure continuously regardless of the menu that is open.
4.3
Functions of membrane keypad
Comma
Back key / return to previous menu
Open the next menu / decrease a number
Return to previous menu / increase a number
Open menu
Confirm / edit
© PCE Instruments
5