M32
CL Settings
Current loop mode options
Select the CL range value
Set the CL output value according to
the flow value at 4 mA or 0 mA.
Set the CL output value according to
the flow value at 20 mA.
4-20 mA check options
a.
Check 4 mA
b.
Check 8 mA
c.
Check 12 mA
d.
Check 20 mA
M33
OCT Settings
The following signal options are
available:
a. Flow Rate
b. POS Total
c. NEG Total
d. NET Total
e. Energy Rate
f. Heat Total
g. Cool Total
h. Rationing
i. Uart CTRL
© PCE Instruments
26