PCE Health and Fitness TDS 75 User Manual page 32

M34
Relay Settings
The following signal options are
available:
a. No Signal
b. *E
c. Reverse
d. Alarm1
e. Alarm2
f. Ration
g. POS Total
h. NEG Total
i. NET Total
j. Not using
M35
Alarm setting
Enter the lower alarm value;
Any measured flow lower than the lower
value will activate the alarm in the OCT
or relay output.
Enter the upper limit alarm value;
any measured flow higher than the
upper value will activate the alarm in
the OCT or relay output.
M40
Toggle Unit
Select the measuring unit as follows:
a. Metric
b. British
© PCE Instruments
28