9.4.5
Snap right side hinge, left side hinge, then top hinge. Hinges can be closed using screwdriver or by hand.
See photos 138-140.
Photo 138
9.4.6
Tighten security bolt. See photo 141.
10
Mounting closure
10.4.1
For pedestal mounting, assemble mounting bracket(s) to back of housing.
10.4.2
Assemble to plate or rod. See photos 142-146.
Photo 142
10.4.3
For strand mounting, assemble strand clamps or supplementary mounting brackets to back of housing.
10.4.4
Assemble to line. See photos 147-148.
Page 32 of 37
© 2021 CommScope, Inc. All Rights Reserved
Photo 143
Photo 144
Photo 139
Photo 141
Photo 145
Photo 140
Photo 146