Table of Contents
Advertisement
7
Cable retention
7.1
If LBT cable, remove any dummy buffer tubes by cutting at cable sheath opening. See photo 85.
7.2
Open hose clamp on cable retention assembly.
7.3
Place cable retention assembly around cable. If cable is shielded and to be grounded, orient the sheath opening,
which exposes the shielding, toward the base of retention clamp. See photos 86-87.
7.4
Insert strength member(s) into lug and tighten. See photo 88.
Page 22 of 37
© 2021 CommScope, Inc. All Rights Reserved
Photo 86
Photo 85
Photo 88
Photo 87
Advertisement
Table of Contents
