1.2
Tools and materials required
•
7/16" wrench – exterior bolt hardware.
•
3/8" wrench – interior bolt hardware and pole mount bracket hardware or type 216C can wrench - exterior and interior
bolt hardware.
•
Self adhesive felt tape (for ribbon central tube applications only).
•
Flathead #2 screwdriver.
1.3
Closure.specifications
The Mini-OTE 300 is a unique solution for splicing, termination and pass-through cable requirements in fiber-to-the-x (FTTx)
architectures.
•
Terminal is re-enterable, swinging open on a hinge for quick access and easy service and maintenance.
•
Available with 2, 4, 6, 8 or 12 adapter ports, full-size or mini-size DLX® hardened adapters.
•
Four gel-sealed input ports for express and branch-off cables for butt installations.
•
One gel-sealed input port for express and branch-off cables for in-line installations.
•
Units are shipped with two factory integrated splice trays and a fiber storage tray. Slack cable storage is available beneath
the splicing trays.
•
Accommodates CommScope's field installable splitters (1x2, 1x4, 1x8) and field installable compact CWDMs (2, 4, 8
channel).
•
Max number of splices.
NOTE: Trays intended for single stranded splice only, ribbon to be de-ribbonized and spliced as single
strands.
Product.Configuration Max # Splices Tray #1
Without Splitter or CCWDM
With Splitter
With CCWDM
*
Requires additional SMOUV holder: SPLICEHOLDER-FIST2-6S45 for holding six splices. Splice holder included in
Main Subassembly for all terminal kits except Tap terminals which are designed as Plug in-Play.
Without Splitter or CCWDM
Page 2 of 37
© 2021 CommScope, Inc. All Rights Reserved
*
40
20
34
14
26
6
Table 1
With Splitter
Tray#2
*
20
*
20
*
20
With CCWDM