Proceed to Section 8 Fiber organizing/storage, routing and splicing.
5.2
Butt.entry.configurations
5.2.1
Mid-sheath.-.loose.buffer.tube.(LBT)
Butt Express (Thru) Configuration
Preparation of Loose Buffer Tube Standard or Micro and Flat Drop with or without trace wire.
5.2.1.1
Prepare mid-span opening: remove 56" of outer sheath. See Figure 8.
5.2.1.2
Cut strength member(s) 1¾" from end of sheath openings. See Figure 8.
5.2.1.3
If Flat Drop has trace wire, cleanly cut away 4" of trace wire from end of sheath opening. See photos 43-44.
Page 14 of 37
© 2021 CommScope, Inc. All Rights Reserved
Photo 39
Photo 41
Photo 43
Figure 8
Photo 40
Photo 42
Photo 44