Sat - Canon WUX5000 User Commands

SAT

Color saturation setting
Format
RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number>
GET□RGBGAIN /
Setting values for <Color saturation setting value:Number> are -20 to 20.
Environment
Power
OFF ON PM D-RGB
X O X
Response
"i:OK" is returned if the parameter was set properly.
For ' or ' ', current saturation setting value is returned as
'GET SAT ?SAT
'
g:SAT=<Color saturation setting value:Number>
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen color saturation.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Color saturation setting" are selected on the menu.
(3) If numerical parameters are outside the range, "
(4) This sets the currently selected input signal and image mode.
(5) The GET command can be used to retrieve the current color saturation. ("
Example
Setting
> SAT=-10
< i:OK
Reference
> GET SAT or ?SAT
< g:SAT=1
* Commands are indicated by ">", and responses are indicated by "<".
?△RGBGAIN
Input
A-RGB COMP HDMI None
-
This sets the color saturation to -10.
This retrieves the color saturation.
- 59 -
WUX5000 / WUX4000 User Commands
'
" is returned.
e:0801 INVALID_VALUE
GET SAT
")