Krep; Lamp - Canon WUX450 User Commands

KREP

Key repeat
Format
Setting Command
Response
Reference Command
Response
< Key repeat parameter: ID >
Parameter
OFF
ON
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes

LAMP

Lamp output setting
Format
Setting Command
Response
Reference Command
Response
< Lamp output setting parameters:ID >
Parameter
FULL
ECO
Environment
Power mode restriction
LAN
SL0 SL1 SL3 ON
No No No Yes
Remarks
(1) This sets the currently selected input signal and image mode.
WUX450 / WX520 / WUX400ST / WX450ST User Commands
KREP=<Key repeat parameter: ID>
i:OK
GET=KREP
g:KREP=<Key repeat parameter: ID>
Note: See "Error list" for any response other than the above.
Meaning
Turned off
Turned on
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
LAMP=<Lamp output setting parameters:ID>
i:OK
GET=LAMP
g:LAMP=<Lamp output setting parameters:ID>
Note: See "Error list" for any response other than the above.
Meaning
Full power
Eco
RS-232C
ST ON D-RGB A-RGB COMP
No Yes Yes Yes
- 40 -
Input
HDMI LAN USB
Yes Yes Yes Yes
Input
HDMI LAN USB
Yes Yes Yes Yes
None
Yes
None
Yes