Freeze - Canon WX6000 User Commands

FREEZE

Freeze status
Format
FREEZE=<FREEZE parameter:ID>
GET□FREEZE / ?△FREEZE
<FREEZE parameter:ID>
ON
OFF
Environment
Power
OFF ON PM D-RGB
X O X O
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET FREEZE ?FREEZE
'gFREEZE=ON'
'g:FREEZE=OFF'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to freeze the image.
(2) This command is identical to pressing the "FREEZE" button on the remote control.
(3) The current freeze status can be obtained using the GET command. ("
Example
Setting
> FREEZE=ON
< i:OK
Reference
> GET FREEZE or ?FREEZE
< g:FREEZE=ON
* Commands are indicated by ">", and responses are indicated by "<".
Image now frozen
Image now not frozen
Input
A-RGB COMP HDMI None
O O O
', current freeze status is returned as
Freezes image.
The current freeze status is referenced.
- 42 -
WX6000 / SX6000 User Commands
X
GET FREEZE
")