Huawei UPS5000-E Series User Manual page 109

UPS5000-E-(350 kVA–800 kVA)
User Manual (50 kVA Power Modules)
Step 4 Remove the copper bars between the mains and bypass input wiring terminals.
(Perform this step only when the mains input and bypass input use different
power sources.)
● Properly keep the removed copper bars and bolts.
● (Optional) If copper bar protective covers are installed for the bypass cabinet, remove the
Figure 3-47 Removing the copper bar protective covers at the rear
Issue 15 (2022-01-30)
NO TE
protective covers and then the connecting copper bars. The protective covers need to be
reinstalled after the connecting copper bars are removed.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
100