Azalea Max And Azalea With Laguna 2 Backrest; Safety Information On Electromagnetic Interference; Safety Devices - Invacare rea Azalea Assist User Manual

CAUTION!
Risk of burning
The wheelchair components can heat up when
exposed to external sources of heat.
– Do not expose the wheelchair to strong sunlight
before use.
– Before usage, check all components that
come into contact with your skin for their
temperature.
WARNING!
Risk of pressure sores and contracted posture
– The user must not be seated in a tilted position
for a long time. The seating positions needs to
be varied to avoid pressure sores.
CAUTION!
Risk of injury
– In case of pressure sore or injured skin, protect
your injure to avoid a direct contact with the
fabrics of the device. Refer to a healthcare
professional for medical advices.
IMPORTANT!
When combining this product with another
product, the restrictions of both products apply
for the combination. E.g. the maximum user
weight of one product in the combination may
be lower.
– Only use combinations allowed by Invacare.
Contact your Invacare distributor for
information.
– Before use, read the user manual of each
product and check the restrictions.
2.2 Azalea Max and Azalea with Laguna
2 backrest
Azalea with Laguna 2 backrest
WARNING!
Risk of tipping backward
When using the Laguna 2 backrest in the highest
position combined with rear activated tilt and
recline, the risk of tipping backward increases.
– Always check and adjust the balance of the
wheelchair in relation to the individual user.
Azalea Max
WARNING!
Risk of tipping forward
The purpose of the seat extender is that it should
be used together with the chassis extender,
otherwise the risk of tipping forward increases.
– Always use the seat extender in combination
with the chassis extender.
– Be careful when driving down a slope or down
from a kerb.
– Control the position of the user to make sure
that the position is stable.
– Always check and adjust the balance of the
wheelchair in relation to the individual user.
1488727-R
2.3 Safety Information on
Electromagnetic Interference
This mobility device was successfully tested in accordance
with International standards as to its compliance with
Electromagnetic Interference (EMI) regulations. However,
electromagnetic fields, such as those generated by radio and
television transmitters, and cellular phones can influence the
functions of powered mobility devices. Also, the electronics
used in our mobility devices can generate a low level of
electromagnetic interference, which however will remain
within the tolerance permitted by law. For these reasons we
ask you to please observe the following precautions:
WARNING!
Risk of malfunction due to electromagnetic
interference
– Do not switch on or operate portable
transceivers or communication devices (such as
radio transceivers or cellular phones) when the
mobility device is switched on.
– Avoid getting near strong radio and television
transmitters.
– In case the mobility device should be set
in motion unintentionally, switch it off
immediately.
– Adding electrical options and other components
or modifying the mobility device in any way
can make it susceptible to electromagnetic
interference. Keep in mind that there is no sure
way to determine the effect such modifications
will have on the overall immunity of the
electronic system.
– Report all occurrences of unintentional
movement of the mobility device to the
manufacturer.

2.4 Safety Devices

WARNING!
Risk of accidents
Safety devices that are incorrectly set or no longer
working (brakes, anti-tipper) can cause accidents.
– Always check that the safety devices are
working before you use the wheelchair and
have them checked regularly by a qualified
technician or your authorized provider.
CAUTION!
Risk of Injury
Non-original or wrong parts may affect the
function and safety of the product.
– Only use original parts for the product in use.
– Due to regional differences, refer to your
local Invacare catalog or website for available
options or contact your Invacare distributor.
See addresses at the end of this document.
The functions of the safety devices are described in chapter
3 Product Overview, page 9 .
Safety
7