Invacare rea Azalea Assist User Manual page 13

Locking of recline and tilt function
A
C
1. Press on the locking key A.
2. Keep pressing on the locking key.
3. Simultaneously press on the chosen function B for the
seat tilt (green) or C for the backrest angle (yellow).
4. Repeat the procedure to unlock the function.
When a function is locked, the yellow indication
lamp D shines.
Charging the battery
WARNING!
Risk of electrical chock
– The user must not sit in the wheelchair whilst
charging the battery.
Damage to the battery
– The battery must be charged 24 hours before
using the system the first time.
– Unplug the mains cable after charging and
before using the wheelchair.
The battery charger has different charging cables in
order to adapt to different local electrical standards.
When the battery level is low (20 %), the system
beeps when it is in use.
Connect Charger Cable
CAUTION!
Damage to the cables
– Do not sit in the wheelchair while charging the
battery.
1488727-R
B
1. Connect the charger cable supplied with the chair into a
2. Insert the charger cable A into the connector B which
3. Unplug the cable when the battery is fully charged.
Hand control — Battery indications
A
A
A
wall socket.
is on the side of the wheelchair.
C
D
Green light — ON — Hand control is activated
A
• Green light — ON — Battery level is above 20%
B
• Green light blinking — ON — Battery is charging
(fixed light when the battery is fully loaded)
C • Yellow light — ON — Battery level is low, below
20%
D Green light — ON — Battery cable is connected
(lights up about 5 seconds after connecting the
cable)
Product Overview
B
A
13