Comeup CAP-9s Manual

Introduction

Feature

Line pull:
Synthetic rope: 10mm × 30.5m synthetic rope SK75
Brake:
Clutch:
Control:

Unpacking

W inch assembly............................................................... 1 pc
． ． ． ．
C ontrol box...................................................................... 1 pc
． ． ． ．
R emote control................................................................ 1 pc
． ． ． ．
S ynthetic rope with clevis hook............................................ 1 pc
． ． ． ．
H awse fairlead................................................................. 1 pc
． ． ． ．
6 ' 2 gauge battery lead...................................................... 1 pc
． ． ． ．
Read this manual carefully
Carefully read and understand this manual before operating the winch.
Careless winch operation may result in personal injury, danger to others and
or damage to property

Installation

Before using the winch ensure all electrical components are in good
condition and all connections are sound.
Winch and Hawse fairlead mounting
． ． ． ．
I t is important that the winch is mounted on a flat
and hard surface or mounting channel to ensure
the motor, drum and gearbox housing align
correctly.
H awse fairlead does not mount to the winch directly.
． ． ． ．
9,000 lb wire rope first layer
Full Load Holding Proprietary Cone Brake
Lift and turn T Bar to activate free spool
Handheld pendant switch
Self-Recovery Winch
Model:
CAP-9s
PN: 859329 12vdc
859312 12vdc