EMS SmartCell Programming Manual page 69

WZM MENUS
WZM Options
Set time & date
The 'Set Time & Date' menu allows an engineer to program the systems time and date. The time will be
displayed on the WZM display and the time and date is also used for time stamping events in the event log.
This menu option also allows the date format to be changed.
If the time and date is not set on the WZM the following display will be shown:
SmartCell WZM
SmartCell WZM
Set Time & Date Set Time & Date
00/00/00 Access
00:00 Access
Lamp Test
This option when entered performs a lamp test on the WZM.
Front Screen Text
The front screen text can be edited in this menu.
WZM LED Disable
This menu option allows the engineer to disable the WZM's external status LEDs.
©2020 EMS Ltd. All rights reserved. Page 69 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM