WZM Status LEDs
LED Indicator
FIRE
FAULT
POWER
WZM buttons
Button
1
2
3
4
FUNCTION 1
FUNCTION 2
©2020 EMS Ltd. All rights reserved.
LED Colour
Illuminates when any device is in fire alarm condition.
Illuminates when any fault condition is present at the
WZM itself or if an associated device is in fault.
Indicates a good power supply.
This button is always active and is used for number entry (number 1) and for
upwards menu navigation.
This button is always active and is used for number entry (number 2) and for
forwards menu navigation.
This button is always active and is used for number entry (number 3) and for
downwards menu navigation.
This button is always active and is used for number entry (number 4) and for
backwards menu navigation.
This button is always active and is used as a menu entry button.
When a valid User PIN has been entered, pressing the Function 1 button will
switch between the first and second language selected for the system.
When a valid User PIN has been entered, pressing the Function 2 button for
2-3 seconds will send a resynchronisation signal to the WZM's wireless
devices.
Page 17 of 80
Function
Function
MK067-0001-99 (Issue 1) 04/11/2020 AJM
INTRODUCTION
START
SLIDE TO
REMOVE
STATUS