Set Time & Date - EMS SmartCell Programming Manual

Set time & date
From access level 3 (refer to the 'Access Level 3' section for
details), press the
3
Press the button and the screen will display:
Press the button once. The screen will display:
3
Press the button and the screen will display:
Press the button and the screen will display:
To change the time, press the
will display:
The following buttons are required to set the time:
Button(s) Action
1 Increases and decreases the selected value.
3
Moves the cursor between the hour and minute selections.
4 2
Saves the changes and returns to the previous screen.
!
Note: the same process is used for changing the date.
©2020 EMS Ltd. All rights reserved.
button until the screen displays:
button and the screen
Page 30 of 80
WZM Information
Language
Factory Access
Reports
Edit Users
WZM Options
System Options
Edit Users
WZM Options
System Options
Set Time & Date
Lamp Test
Front Screen Text
WZM LED Disable
??:??
??/??/??
DD/MM/YY
Press To Select
??:??
Edit To Select
MK067-0001-99 (Issue 1) 04/11/2020 AJM
TIME
DATE
FORMAT
TIME