Wzm Display; Access Level 1 Entry - EMS SmartCell Programming Manual

WZM display

Once the WZM has been fully installed and powered up, the WZM will show the following alternating default
'System Normal' displays.
SmartCell WZM
System Normal
12:12
This is described in full below.
Programmable text that
can be changed as
required, e.g. site name
The set time and date
are alternatively shown
here
Entry to the menu and then into the required menu options can be achieved by entering a valid access code
and using the WZM's navigation buttons. Exiting from a menu option is achieved automatically via a
time-out period, by pressing the

Access level 1 entry

No valid access code is required for access level 1. To view events on the WZM, the
to select the type of event to be viewed i.e. faults, disablements etc. The
to scroll through these events.
©2020 EMS Ltd. All rights reserved.
Access
SmartCell WZM
System Normal
12:12
button or by selecting the logout menu option.
4
Page 18 of 80
SmartCell WZM
System Normal
10/01/20
Access
and
1
MK067-0001-99 (Issue 1) 04/11/2020 AJM
Access
Current system status
Access to other options
button can be pressed
2
buttons can be used
3