EMS SmartCell Programming Manual page 34

905
0359-CPR-XXXX
INPUT
L N E
Menu Selection
Text Description
Detection
Smoke Sen
Heat Sen
Sound Volume
Self Sound
Audio/Visual
O/P 1 OFF
O/P 2 OFF
* EN54 approved sensitivities † Default dual sensitivities
©2020 EMS Ltd. All rights reserved.
Available options
Refer to the 'Device location text' section overleaf for details.
Detection selection of 'Dual' (smoke & heat), 'Smoke Only' or 'Heat Only'.
Smoke sensitivity selection of; 'Normal*†' and 'Normal + AVF'. (The AVF
option allows additional verification of the alarm condition before
reporting).
Heat sensitivity selection of; '58 °C Static*†', '58 °C Rate Of Rise*', '72 °C
Static*', '72 °C Rate Of Rise*'.
Allows device sounder levels of; 'High' or 'Low'.
When enabled, the will device sound upon local alarm detection, whilst
wireless communication with the WZM is lost.
Allows device sounder and beacon selection of; sounder & beacon, sounder
only and beacon only.
Choose to switch the device's 'Output 1' off, when either the 'silence' or
'reset' button is pressed.
Choose to switch the device's 'Output 2' off, when either the 'silence' or
'reset' button is pressed.
Page 34 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM