Set The Panel Type - EMS SmartCell Programming Manual

Set the panel type

Default panel type is 'Conventional'. If the WZM is to be
connected to a conventional type fire panel, skip this section.
Otherwise, to change the panel type to 'Addressable',
access level 3 (refer to the 'Access level 3' section for details),
press the button until the screen displays:
3
Press the button and the screen will display:
Press the button and the screen will display:
3
Press the button and the screen will display:
Press the button and the screen will display:
©2020 EMS Ltd. All rights reserved.
from
Page 37 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Conventional
Addressable
Conventional
Addressable
Addressable Panel
Selected