Device Indicator Operation - EMS SmartCell Programming Manual

Device indicator operation

This feature is only available when the 'Panel Type' is set to 'Addressable'. As default, the device LED
indicators are switched 'Off When Silenced' (upon receipt of a silence command signal from the control
panel). Alternatively 'Off When Reset' can be selected (where the device LED indicators switch off upon the
receipt of a reset command signal from the control panel .
If the indicators are to be switched 'Off When Reset',
access level 3 (refer to the 'Access level 3' section for details),
press the button until the screen displays:
3
Press the button and the screen will display:
Press the button until the screen will displays:
3
Press the button and the screen will display:
Press the button until the screen will displays:
3
Press the button and the screen will display:
©2020 EMS Ltd. All rights reserved.
from
Page 43 of 80 MK067-0001-99 (Issue 1) 04/11/2020 AJM
SYSTEM SETUP
View System Status
Maintenance/Test
Device Options
WZM Settings
Panel Type
Sounder Options
Device Indicator
Panel Type
Sounder Options
Device Indicator
Off When Silenced
Off When Reset
Off When Silenced
Off When Reset
Fire Status
Turned Off
When Reset