Control Unit Manual Controls; Alarm Set Point Adjustments; Alarm Time Delay Adjustment - EMS 1304 Installation And Operation Manual

Control unit manual controls

ACK - Acknowledges fault alarms and displays the fault message.
- Changes display each time it is pressed; Opacity %, Average Opacity, dust/zero shift, hours to next cal.
DIS
- initiates a maintenance cal cycle and resets calibration cycle timer clock.
AUTO/MAN

Alarm set point adjustments

Under the flip down door, press the EDIT (ESC) button (the red Edit
(ESC) LED will light). The message display will read QUICK MENU.
Press the ENTER key, then the EDIT  key 1 time until the Display
reads ALARM SET POINT. Press the ENTER key twice, the Edit
Value Light will flash. Press and hold the EDIT  or EDIT  key
until the desired set point in % opacity value is displayed, i.e. 20.00 is
20.00% opacity. Press the EDIT key 4 times to return to normal
operation.

Alarm Time Delay Adjustment

Under the flip down door, press the EDIT (ESC) button (the red Edit
(ESC) LED will light). The message display will read QUICK MENU.
Press the ENTER key, then the EDIT  key 2 times until the Display
reads ALARM TIME DELAY. Press the ENTER key twice, the Edit
Value Light will flash. Press and hold the EDIT  or EDIT  key until
the desired time in seconds is displayed, i.e. 15 is 15 seconds delay. Press
the EDIT key 4 times to return to normal operation.
PV
EDIT
26
+19999
MESSAGE
ACK DIS


AUTO
MAN
REM
LOC
SP OUT
 
(ESC)
EDIT
ENTER EDIT
"Edit
Value"
Light
"Scroll
Menu"
Light
Moves
Message
Cursor
EDIT
Keys
Hinged
Cover