Notes On Possible Property Damage - Samson TROVIS 5724-3 Mounting And Operating Instructions

WARNING
!
Risk of personal injury through incorrect operation, use or installation as a result of
information on the actuator being illegible.
Over time, markings, labels and nameplates on the actuator may become covered with
dirt or become illegible in some other way. As a result, hazards may go unnoticed and
the necessary instructions not followed. There is a risk of personal injury.
Î Keep all relevant markings and inscriptions on the device in a constantly legible
state.
Î Immediately renew damaged, missing or incorrect nameplates or labels.

1.3 Notes on possible property damage

NOTICE
!
Risk of actuator damage due to the supply voltage exceeding the permissible toler-
ances.
The actuator is designed for use according to regulations for low-voltage installations.
Î Observe the permissible tolerances of the supply voltage.
Risk of actuator damage due to incorrect wiring of the inputs.
Incorrect wiring of the inputs may lead to excessively high voltages and damage the
electric actuator with process controller.
Î Wire the inputs range according to the technical data.
Risk of actuator damage due to excessively high tightening torques.
The connection of the electric actuator must be tightened with certain torques. Excessive
tightening torques lead to parts wearing out more quickly.
Î Observe the specified tightening torques.
Risk of damage to the actuator by turning it too far.
The actuator stem of the electric actuators can be adjusted manually.
Î Move the actuator stem only as far as the bottom or top end position.
EB 5724 EN
Safety instructions and measures
1-5