Samson TROVIS 5724-3 Mounting And Operating Instructions page 10

NOTICE
!
Malfunction due to a configuration that does not meet the requirements of the appli-
cation.
The electric actuator with process controller is configured for the specific application by
setting configuration items and parameters.
Î Perform the configuration for the specific application during start-up and after a re-
set to default settings.
Risk of damage to the screw heads on the front cover due to the use of the wrong
tool.
The actuator housing cover is fastened using TORX PLUS
Î To screw or unscrew the screws, only use the following screwdrivers:
− TORX
®
− TORX PLUS
− Flat-blade screwdriver with 0.8 mm blade thickness and 4.0 mm blade width
1-6
T10
10IP
®
screws, size 10IP.
®
EB 5724 EN