Table of Contents
Advertisement
Blinking pattern of the red LED
− Memory pen inserted
Fig. 8-3: Connecting actuator and memory pen
Data transmission between the actuator
and memory pen
The memory pen is connected to the actuator
as shown in Fig. 8-3. Refer to the TROVIS-
VIEW Operating Instructions u EB 6661 on
how to transfer data.
The yellow LED on the actuator indicates that
the data logging is being prepared. Data
transmission is completed when the yellow
LED is illuminated continuously.
EB 5724 EN
On
Off
2
1
8.5.1
Copying function
The memory pen can be used to copy setting
data to other TROVIS 5724-x Actuators after
the data from the actuator have been trans-
ferred to the memory pen.
Note
"Automatically write to memory pen" is auto-
matically reset to the read status after data
are transferred from the actuator for the first
time.
Operation
Time in s
1 Memory pen
2 Serial interface
(RJ12 jack)
8-7
Advertisement
Table of Contents
