Table of Contents
Advertisement
EXPERT PN110
4. INSTALLATION SETUP
4.1.
Setting the Time &
Date
1. Select:
» TIME & DATE
Time & Date
Y /M /D
Date
2001/03/29
Time
11:21:15
2. Press the right-arrow key once. The year
fl ashes. Press the Edit key then use the arrow
keys to set the year. Press the right-arrow
key once again, the month fl ashes. Press the
Edit key then use the arrow keys to adjust
the month. Press the right-arrow key. The
day fl ashes. Press the Edit key then use the
arrow keys to adjust the day to the appropri-
ate value. Press the Edit key once again to
validate the date.
3. Press the right-arrow key once again, the
hours fl ash. Press the Edit key then use the
arrow keys to adjust the hours. Press the
right-arrow key. The minutes fl ash. Press
the Edit key then use the arrow keys to set
the minutes. Press the right-arrow key. The
seconds fl ash. Press the Edit key then use the
arrow keys to adjust the seconds. Press the
Edit key once again to validate the time.
4.1.1. Adjusting Improper System
Time
When the notifi cation message that follows is
displayed onscreen you must set the correct
time and date.
Improper System Time
Set Time & Date
To ensure accurate feed data, history
logs, and other important system in-
formation, you must set the correct
time and date whenever prompted.
To adjust the time and date when the "Im-
proper System Time" notifi cation appears, fol-
low the steps outlined in section "4.1. Setting
the Time & Date".
Once the time and date have been adjusted,
the notifi cation message disappears, the sys-
tem clock is set, and accurate data is ensured.
The notifi cation message repeatedly
disappears and reappears until the
time and date are set.
4.2.
Password
This function allows to identify 2 different
user types. It is used to restrict access to
certain parameter settings.
Installer password [06-01-00]
By default, the INSTALLER PASSWORD is
set to "06-01-00". The installer mode gives
access to all functions of the EXPERT-PN110.
By default, the controller returns to the user
mode after 15 minutes of inactivity. The in-
staller may return to user mode before that
delay by entering the user password. The
installer password can be modifi ed.
User 1 password [01-02-03]
The user mode gives access to the basic func-
tions of the EXPERT-PN110. By default this
password is set to "01-02-03". Note that some
menus will not be accessible with this user
mode. The user password cannot be modifi ed.
and the controller automatically returns to user
mode after 15 minutes of inactivity.
• Entering the password:
1. Select:
» USER
8. Password
»
1. User Level
»
The current mode is displayed.
Password
Enter password:
00 ** **
2. Press the right-arrow key to enter a pass-
word. The fi rst two-digit number fl ashes on
the display. Press the Edit key once then use
the arrow keys to set the fi rst number. Press
the right-arrow key once. The second two-
digit number fl ashes on the display. Press the
Edit then use the up and down-arrow keys to
set the second number. Proceed in similar
fashion to set the third two-digit number.
Press the right-arrow key one last time to
validate the complete password.
If the password entered is incorrect, an error
message "Wrong Password" is displayed.
• Changing the Installer Password:
1. Select:
» USER
8. Password*
»
2. Installer
»
* The installer password is required to acces this
menu.
Installer Password
code #1
6
code #2
1
code #3
0
2. Set the installer password as required.
The password "1-2-3" is reserved for the
user mode. Do not use the same number
sequence for the installer password.
Choose an easy-to-remember password
and write it down in a safe place!
4.3.
Measuring Units
1. Select:
» USER
4. Units
»
Time Display
24H
Temperature
°F
Water
Lit
Static Pressure"WC
2. Set the following parameters:
Time display — AM/PM / 24 hours;
Temperature units — Celsius (Deg C) or
Fahrenheit (Deg F).
Water — Gallons / Liters
Static Pressure — Inches of water ("WC) or
Pascal (Pa).
4.4.
LCD Contrast
The LCD screen contrast can be adjusted
from 10 to 100%.
1. Select:
» USER
1. LCD Contrast
»
EXPERT PN110 rev.23
7
Advertisement
Table of Contents
