Sensor Unit Relpacement - Sega SHOOT THIS WIN THIS Service Manual

10.2 Sensor Unit Replacement
1
Remove the L cover following the same procedures used when replacing a microswitch.
2
Remove the connector and then
10
remove the sensor unit.
3
After replacing the sensor unit, reassemble the gun.
Operate the trigger to full� verif� that the microswitch turns on and off properl�. �hen, reattach
the L cover to the R cover.
4
After replacing the sensor unit, refer to the section titled "GA�E �ES� �ODE" . Conduct a Gun
Ad�ustment �est.
46
SENSOR UNIT
APA-2030
Remove the connector.
FIG. 10c