Keypad Lock Settings - ASCOM d83 User Manual

USER MANUAL
Ascom d83 DECT Handset
Set Alerts for Messages
1. Select Message alert. Different message alerts can be selected. The handset has 8 different message
alerts by default, see
2. Select message alert from list. Press Play to listen to the different sounds.
The option Custom sounds should be selected to create a customized message alert. For more
information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
The Play soft key is not available for Enhanced beep and Custom sound. Instead, send a
message to the handset to listen to the sound.
3. Press Back.
By default, the message volume follows the ring volume setting. However, a different message volume can
be set if required. refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
Turn the Vibrator On or Off
If the vibrator is activated, it vibrates on incoming calls and messages. In addition, the vibrator can also be
activated when receiving a message during a call. For more information, refer to the Configuration Manual,
Ascom d83 DECT Handset, TD 93426EN.
1. SelectVibrating alert.
2. Select On, On if silent (that is, the vibrator is on only when the handset is muted), or Off.
3. Press Back.
Set the Key Sound
This means that every time a key is used, a low sound is heard.
1. Select Key sound.
2. Select Silent, Click, or Tone.
3. Press Back.
To listen to the key sound, press the soft key Play.
8.8.2

Keypad Lock Settings

The handset keypad can be locked automatically to minimize the risk of accidentally pressing keys or
buttons while the handset is not in use. The keypad is automatically locked after a lock time parameter
Auto lock time expires.
The alarm button can be pressed while the keypad is locked. Any one of five predefined
emergency numbers can also be called while the keypad is locked as long as this feature has
been configured in the WinPDM/Device Manager. For additional information, refer to the
Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
The automatic key lock can be configured by the administrator in the WinPDM/Device Manager. For
additional information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN. The
user may also configure the automatic key lock as described in the following sections.
Automatic key lock: One of the following options may be configured:
• On: the keypad is automatically locked if it is not used before the specified lock time elapses.
• On, except calls: the keypad is automatically locked if it is not used for the specified lock time. If the user
is in call when the lock time elapses, the keypad remains unlocked until the user has completed the call.
TD 93434EN / 01 December 2021 / Ver. B
3.8 Settings, page 21.
Menu Operation
71