Settings; Sound And Alert Settings - ASCOM d83 User Manual

Menu Operation
5. Press Search. The search result will be displayed. If the number of matching entries is more than 25,
press the More search results item to see more contacts.
View Last Search Result
1. Select Central phonebook.
2. Select Last result. The search result contains recently viewed entries. For example, if the number of
matching entries was 30 and the "More search results" item was selected, five remaining entries are
displayed in the last search result.
8.8

Settings

1. Enter the menu by pressing the Menu soft key.
2. Select in the menu.
8.8.1

Sound and Alert Settings

Adjust the Ringer Volume
1. Select Sound & Alerts.
2. Select Volume.
3. To increase the volume, press right on the navigation key. To decrease the volume, press left on the
navigation key.
4. Press OK to save the setting.
If a handset restriction is enabled, it might not be possible to set the ring volume to Silent, refer to
the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
If a handset restriction is enabled, it might not be possible to decrease the ring volume lower than
the allowed level. When attempting to do so, the following pop-up message appears: Volume
reset to the lowest level allowed. For more information, refer to the Configuration Manual,
Ascom d83 DECT Handset, TD 93426EN.
Select Ring Signals
1. Select Sound & Alerts.
2. Select Ring signals.
Different signals for internal calls, external calls and call back can be set.
3. Select Internal call, External call, Callback, or PTT. The handset has 14 different ring signals.
4. Press Select.
5. Select ring signal. To listen to the different sounds, press Play.
6. Press Select.
7. Press Back.
Additional ring signals might be selectable if they are configured via WinPDM. For more
information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
70
Ascom d83 DECT Handset
TD 93434EN / 01 December 2021 / Ver. B
USER MANUAL