Alphanumeric Keys - ASCOM d83 User Manual

USER MANUAL
Descriptions
Ascom d83 DECT Handset
Multifunction Button 2
By default, long press is not configured and multi-press is configured to put the device in sleep mode.
The button can be used as a shortcut in idle mode both with multi-press and long press.
If configured, the button can be specifically used as a PTT button and all pre-configured shortcuts will be
disabled.
Key Lock, and Upper/Lower Case Key
The key is to lock the keypad in combination with the Soft key "Lock". It is also for switching between
upper/lower case and digits.
Soft Keys
Soft keys
The three Soft keys are located just beneath the display and the functions of each Soft key is indicated by
text in the display just above the keys.
In idle mode, the Soft keys can be used for specific functions defined by the user of the handset.
Hot Keys
Any key "2" - "9" can be set to a Hot Key. A long press on any of these numbers in stand by mode are by
default a shortcut to the Call contact list. The list is in alphabetic order, and depending on which key that is
pressed is dependent on where in the list the contact appears.
A Hot Key can be programmed to give access to frequently used functions such as dialling a specific
handset number, a shortcut on the menu, or sending an SMS.
Volume Buttons
The two buttons placed on the upper left side of the handset are used for increasing/decreasing the
earpiece, headset, and the loudspeaker volume in an active call.
The volume buttons can be used to adjust the ring volume in idle mode. The volume level will be indicated
with a pop-up on the display.
2.5

Alphanumeric Keys

Alphanumeric keys consist of numbers, letters and other special characters.
12 TD 93434EN / 01 December 2021 / Ver. B