Alarm With Data; Automatic Call After Alarm - ASCOM d83 User Manual

USER MANUAL
Ascom d83 DECT Handset
• A precise location given by DECT location devices or LF location devices, refer to Configuration Manual,
Ascom d83 DECT Handset, TD 93426EN.
• A precise location given by IR location devices, refer to the Configuration Manual, Ascom d83 DECT
Handset, TD 93426EN.
• A precise location given by BLE location devices, refer to the Configuration Manual, Ascom d83 DECT
Handset, TD 93426EN.
7.5.1

Alarm with Data

The data must manually be defined and stored by the user. To use the function, one Soft/Hot key/
Navigation key in the handset must be defined as a shortcut to the menu Edit alarm data, see
page 60. The stored data is added to all types of alarm at transmission.
7.6

Automatic Call after Alarm

A handset can be setup to call a predefined number after an alarm has been sent. The number can also be
dialled without sending an alarm by pressing a push-button that is not configured with alarm functionality.
Depending on the settings, the call can be established in the following modes:
• Normal
• Loudspeaker
• Monitoring
For more information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
TD 93434EN / 01 December 2021 / Ver. B
Alarm Operation
8.3 Shortcuts,
49