6.10 Answering A Text Message With A Predefined Message; Calling While Reading A Text Message; Calling The Message Sender; Calling A Different Party - ASCOM d83 User Manual

USER MANUAL
Ascom d83 DECT Handset

6.10 Answering a Text Message with a Predefined Message

To respond to an incoming text message with a predefined message, perform the following steps:
1. Press the soft key Reply
2. Press the More soft key. The Templates option is displayed.
3. Press the soft key Select. A list of predefined message templates is displayed.
4. Navigate to the required message template and press the Select soft key. If required, edit the message
as described in The Templates Menu, page
5. Press the soft key Send. The message sender's number is displayed in the handset display.
6. Press the soft key Send. A Message sent confirmation is displayed and the message is sent to the
message sender.
6.11

Calling while Reading a Text Message

A user can make a call while reading a text message to review and discuss the message with the called
party. The called party may be either:
• The message sender, that is, the same party that sent the text message.
• A different party.
The user can activate the loudspeaker function during the call to make it easier to read the received text
message while talking to the called party.
6.11.1

Calling the Message Sender

To call the message sender while reading and reviewing a received text message, perform the following
steps:
1. Receive the text message and call the message sender as described in
2. Wait for the called party to reply. The message is replaced by the ongoing call details. The user may
now do one of the following:
− Continue with the call without referring back to the received message.
− Redisplay the message and continue the call to further review and discuss the message. See
Redisplay the Message and Continue with the Call, page
− Redisplay the message and terminate the call. See
page 44.
6.11.2

Calling a Different Party

To call another party to read and review a received text message, perform the following steps:
1. Open the message as described in
2. From the pop-up menu, navigate to the Call menu item and press the Select soft key. The pre-dial
screen is displayed. Enter the number of the party to be called or select a number from the handset call
list or local or central phone books.
3. Press the Call soft key and wait for the called party to reply. The message is replaced by the ongoing
call detail. The user may now:
− Continue with the call without referring back to the received message.
− Redisplay the message and continue the call to further review and discuss the message. See
Redisplay the Message and Continue with the Call, page
TD 93434EN / 01 December 2021 / Ver. B
39.
Redisplay the Message and Terminate the Call,
8.5 Messaging, page 63
Call Sender, page
44.
and press the More soft key.
44.
Messaging
63.
43