Profiles - ASCOM d83 User Manual

USER MANUAL
Ascom d83 DECT Handset
2. Enter number.
3. Select Send.
Delete Message
1. Select Delete.
2. Select Yes to delete the message.
Delete/Delete All
1. Select More.
2. Select Delete or Delete all.
3. Select Yes if the unsent message shall be deleted.
8.6

Profiles

An own profile can be set up for incoming calls, message alerts, message volume, vibrating alerts, key
sound etc. This can be useful when there are many users on the same handset who require different sound
profiles. It can also be used for temporarily settings, for example while in a meeting incoming calls should
be silent. A user can then switch to his or her own particular profile when using the handset. If no profile is
selected, the normal settings are used.
The settings in a profile can be superseded if the corresponding settings in a system profile are
activated. When the system profile is activated, its settings are not displayed in the handset menu.
However, they can be displayed when a system profile is activated in the handset. See
Profiles, page
1. Enter the menu by pressing the Menu Soft key.
2. Select in the menu.
Add New Profile
1. Open the Profiles menu.
2. Select Add new.
3. Enter name of the profile.
4. Press Save.
5. Press More and then select Add setting.
6. Select the setting you want to add to the profile.
Repeat steps 6-7 if you want to add additional settings.
7. Mark the wanted setting and press Edit to make the changes.
Add New Profile Based on Another Profile
A new profile based on another profile can also be created in the following way:
1. Open the Profiles menu.
2. Enter name of the profile.
3. Press Save
4. Press More and then select Import from.
5. Select the profile which settings to be used for the new profile.
TD 93434EN / 01 December 2021 / Ver. B
78.
Menu Operation
10 System
65