Fat Poopme - Henny Penny FlexFusion FPE-615 Service Instructions Manual

9 Troubleshooting

9.1 Fat Poopme

Switch on grease pump G40 via relay test (K13) in
the service menu. Does the pump switch on (noise)?
Is 120V present at relay K40 between terminals A1
Is 120V present at relay K40 between terminal A2
and terminal 14?
Grease pump G40 defective. Replace component.
Before testing, spray water into the cooking chamber with the hand
shower. Repeat this during troubleshooting if necessary.
No
and A2?
Yes
Yes
Service-instructions
Yes
Check hose and piping for blockage. Clean if
necessary.
No
Relay on control board A1 defective. Use reserve
relay or replace circuit board.
No
Relay K40 defective. Replace component.
Troubleshooting
15