Datalogic Matrix 320 Product Reference Manual page 42

RAPID CONFIGURATION
NOTE
8. Click the Acquire PPI button to automatically set the Image Density so that Matrix
NOTE
24
MATRIX 320
To uncrop the sensor reading area, right click on the box on the top right
corner of the cropping region and select Maximize all.
320 will function correctly and to the fullest extent of its capabilities. This proce-
dure is necessary for first time installation, or if the focal distance changes.
After the Focus Calibration procedure:
1. make sure that both Focus and Diaphragm lens rings are blocked;
2. if using an embedded 36 LED illuminator, mount the adapter side cov-
ers.
Refer to Matrix 320 C-Mount Mounting Instructions, starting on page 68
for more details.