INSTALLATION
10. Mount the heat sink (see "
Heat Sink mounting instructions
When to mount the heat sink
The heat sink provided in the package is to be used as an adapter for rotating brackets
and for heat dissipation. Its use is recommended especially in high ambient tempera-
ture applications. Refer to the Product Reference Guide for more information.
How to mount the heat sink
The Matrix 320 package contains the following materials to mount the heat sink:
•
•
•
To install the heat sink on the reader, please follow this procedure:
1. Insert the screws and washers
2. Tighten the screws
72
MATRIX 320
1 heat sink
4 black screws
4 black washers
through the heat sink and
thread them loosely into the
Matrix 320 reader, as shown in
the figure below.
Heat Sink mounting instructions" on page 72
9. Mount the adapter
side covers. These
come the magnets,
so they can be
attached to a metal
board or to each
other to keep your
hands free during
installation.
).