Internal Network Configurations - Datalogic Matrix 320 Product Reference Manual

Image based industrial reader
Hide thumbs Also See for Matrix 320:
Table of Contents

Advertisement

INTERNAL NETWORK CONFIGURATIONS

Internal Network configurations (also called Master/Slave configurations), are designed
to collect data from several devices connected together in an ID-NET™ network and
send data output to the Host system.
DL.CODE has a Net Autoset feature for the Internal ID-NET Network which automatically
recognizes and assigns addresses to all connected Slave readers.
In order to automatically recognize the ID-NET Slaves, all devices must be physically
installed and electrically connected (including ID-NET network wiring).
The general procedure (also detailed in the following paragraphs) is to:
1. Mount all the readers mechanically (refer to "
2. Run DL.CODE and verify that all the devices are discovered and shown in the
3. Connect to the designated Master device in DL.CODE and open the Setup Internal
4. Depending on the application, select Set Default Multidata Configuration or Set
5. Connect to each Slave reader via Ethernet and set the Slave specific parameters
6. For Synchronized networks Verify/Test network performance. See "
7. Perform the Backup current Internal Network configurations procedure. See
and "
Mounting And Positioning Matrix 320" on page 62
NET Interface" on page 85
nal Network Role = Slave).
device list area.
Network Configuration. You will be prompted to change the device to Master.
Click OK. The Slave units will automatically be recognized. See "
.
tion" on page 146
Default Synchronized Phase Mode Configuration.
depending on the application type. Save each Slave specific configuration. See
"
Multidata ID-NET Network Configurations" on page 148
Network Configurations" on page 153
Slave Synchronized Configuration" on page 157
"
.
Backup" on page 161
INTERNAL NETWORK CONFIGURATIONS
Mechanical Dimensions" on page 56
) with factory default settings (Layout Type = Alone, Inter-
.
.
) and electrically (refer to "
Master Configura-
or "
Synchronized ID-NET
Verify Master/
PRODUCT REFERENCE GUIDE
ID-
145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents