Datalogic Matrix 320 Product Reference Manual page 165

INTERNAL NETWORK CONFIGURATIONS
When finished, all the Slaves should have been correctly recognized. If not, verify all
device connections and power and then repeat the operation by clicking on the Start
Net Autoset button.
Repeat
Depending on the application, select one of the Default Internal Network Configura-
tions: Multidata, Synchronized Phase Mode or Synchronized PackTrack.
Multidata
Synchronized
This selection will open a pre-configured job for the Master reader according to the
selection. Follow the specific application instructions in the following paragraphs.
147
PRODUCT REFERENCE GUIDE