Switches At Machine Heads; Switches On Tension Plate - Brother BES-962BC Instruction Manual

Chapter 3 Embroidering Procedures
BES-962BC
60

Switches at Machine Heads

Start switch
Stop switch
Stop switch
Stops embroidering operation. When embroidering is stopped,
Refer to "Resetting Machine Stop" (
Start switch
Starts embroidering. Holding down this button executes embroidering at a low speed.
When resuming embroidering after stop switch, release machine stop before
pressing this button. Refer to "Resetting Machine Stop" (

Switches on Tension Plate

BES-962BC • BES-1262BC
BES-1262BC
Between head No.1 and No.2
Between head No.3 and No.4
Between head No.5 and No.6
Between head No.2 and No.3
Between head No.4 and No.5
page 191) to stop flashing.
THREAD SENSOR lamp
HEAD switch
MENDING lamp
MENDING switch
STEP BACK/FWD switch
Stop switch
Start switch
flashes.
page 191) for details.