Measures Against Thread Breakage; Remedies - Brother BES-962BC Instruction Manual

4. Measures against Thread Breakage

4-1 Remedies

1. If embroidering is suspended due to thread
2. Correct the broken thread and pass it
3. Press the STOP switch or press the STEP
4. Return the hoop to a position where thread
THREAD
SENSOR lamp
HEAD switch
MENDING
lamp
MENDING
switch
STEP BACK/
FWD switch
5. Press the START switch on the operation
BES-962BC • BES-1262BC
Chapter 7 Operation of Machine
breakage, the THREAD SENSOR lamp of
the machine head with a thread breakage
blinks.
through again.
* Refer to "Chapter 2, 3-1 Upper Threading" for details.
BACK/FWD switch in order to reset the
alarm.
STOP
breakage occurred by pressing the STEP
BACK switch.
or
Note) When the switch is turned for 20 stitches or
more, the machine continues operation with-
out holding the switch. To stop the machine,
turn the switch to the opposite side.
panel or the start switch located between
the machine heads to resume operation.
or
193