Brother BES-962BC Instruction Manual page 24

Chapter 1 An Introduction of Embroidery Machine
Selection of Menu
Processing of software is carried out by giving a command. A command can be
given by the mouse as described below:
1.
2.
Messages and symbols
Some messages to be displayed on a computer screen may contain the following
symbols. These are the symbols for Windows; therefore, they are different from the
symbols described in "SAFETY INSTRUCTIONS" on page 1.
22
Move the arrow pointer to a menu name and click there.
A list of commands is displayed. Click the required command.
The check mark ()
indicates that the
command is selected.
When the arrow pointer is moved to another menu while a list of commands is displayed, those
of the latter menu are displayed.
Information: This symbol indicates the information on the result of an
operation.
Warning: This symbol indicates a warning if user's judgment is needed
to continue the current operation.
Important: This symbol indicates a problem if it occurs.
BES-962BC • BES-1262BC
Dimmed commands
cannot be used unless
an appropriate item is
selected.
Commands with a mark
have sub menus.