Insert Lock Stitch - Brother BES-962BC Instruction Manual

Insert Lock Stitch

Find the pattern of [Stitch] - [Trim] for [Before Trimming] and find the pattern of
[Trim] - [Feed] - [Stitch] - [Stitch] for [After Trimming], then insert a lock stitch.
Insertion method of lock stitch depends on the length of the second stitch as
follows:
Stitch length
1.2 mm or more
From 0.9 mm to less than 1.2 mm
From 0.6 mm to less than 0.9 mm
Less than 0.6 mm
The inserted lock stitch cannot be deleted. However, use [Undo] in the Edit menu
to return to the status before inserting the lock stitch just after the lock stitch is
inserted.
1. Select [Insert lock stitch] from the Edit menu.
2. Designate the position to insert the lock stitch and click [OK].
3. If the lock stitch can be inserted, click [Yes].
BES-962BC • BES-1262BC
Chapter 5 Editing Embroidery Data
Method of lock stitch
Insert 3 stitches of 0.3 mm stitch.
Insert 2 stitches of 0.3 mm stitch.
Insert 1 stitch of 0.3 mm stitch.
Do not insert the lock stitch.
113