Brother BES-962BC Instruction Manual page 227

BES-962BC
Lubricate the following part indicated by the arrow ("clearance" between the connecting rod
and the needle thread take-up bearing) once a week.
(Note) • In lubrication, select needle bar 9 and remove arm cover L to check the lubrication area. Be sure to wipe
off excessive oil spilt at the lower part of the arm.
Thread take-up bush
BES-1262BC
Lubricate the following part indicated by the arrow ("clearance" between the connecting rod
and the needle thread take-up bearing) once a week.
(Note) • In lubrication, select needle bar 12 and remove the head cover to check the lubrication area. Be sure to
wipe off excessive oil spilt at the lower part of the arm.
Thread take-up bush
Connecting rod
Arm cover L
Connecting rod
Head cover
BES-962BC • BES-1262BC
Chapter 9 Maintenance
Connecting
rod
Connecting
rod
225