Brother BES-962BC Instruction Manual page 252

Chapter 11 Error code list
Code
Send/Receive inconsistent error during interfacing to
E-E9
main PCB CPU
ACK code receiving error during interfacing to main
E-EA
PCB CPU
Send/Receive ID code error during interfacing to
E-EB
main PCB CPU
Send data checksum error during interfacing to main
E-EC
PCB CPU
Data empty error during interfacing to main PCB
E-ED
CPU
E-EF Receiving error on interface
E-F1 Send time up error
E-F2 Request-to-waiting time up error
E-F3 Request-to-recive time up error
E-F4 Receive command error
E-F5 NACK code receiving error
Data requested for needle position can not be re-
E-F6
turned.
E-F7 It is not receive command for the request one.
E-F8 PRE code error
E-F9 No applicable command
E-FA Interface receive data sum check error
E-FB Send time up error
No status is returned from spindle, lower shaft motor,
E-FF
or CPU.
250
Error
BES-962BC • BES-1262BC
This is not usually displayed.
Measures