Brother BES-962BC Instruction Manual page 140

Chapter 6 Embroidering
Changing display colors
1.
138
The color of needle bar changes to the actual color.
Changing the thread spool also changes the display color. A confirmation screen
to save appears before exiting from embroidering or retrieving other data.
A display color can be selected from among the following four items.
Basic color which can be selected screen
on the "Color selection"
Color sample supplied by a manufacturer
Color sample created by a user
Adjustment of an intermediate color from the
color sample supplied by a manufacturer or
naming and registration of a newly created color
The following screen is displayed when colors to be displayed are set to 256 in
[Display properties] and the color sample supplied by a manufacturer cannot be
selected or an intermediate color cannot be created.
Double-click the thread spool or needle bar number.
BES-962BC • BES-1262BC
Refer to steps 1 and 2.
Refer to steps 1 and 3.
Refer to steps 1 and 3.
Refer to steps 1 to 7.