Chapter 11 Error Code List - Brother BES-962BC Instruction Manual

Brother sewing machine user manual
Hide thumbs Also See for BES-962BC:
Table of Contents

Advertisement

Chapter 11 Error code list

Code
E-00
No error occurs.
Either motor of main shaft, X- or Y-axis, or lower
E-01
shaft has locked.
Overtravel occurs during home position detecting
E-02
movement.
The stop switch is pressed during home position de-
E-03
tecting movement.
E-04
Zero detecting movement out of range
E-05
Needle stop position error
E-06
Needle bar case position error
E-07
Needle bar case lock
Stop switch or emergency switch was pressed while
E-08
the needle bar case is traveling.
E-09
X-axis home position detection error
E-0A
Thread breaking error
E-0B
Stop or emergency stop during sewing
E-0C
Insufficient bobbin thread
E-0D
The machine does not return to the home position.
E-0E
Mending finish
E-0F
Undefined error
E-14
Y-axis home position error
Stop error during SSP processing (when pressing
E-15
the stop key while the hoop is moving)
The destination needle bar number given from PC is
E-16
out of the movable area.
The speed Vol. number given from PC is out of the
E-17
appropriate range.
E-18
X-axis stepping motor connector error
E-1A
Destination coordinates error
E-1B
The machine has reached the mending stop position.
E-1C
The machine stops during mask tracing.
The machine stops while the needle is moving be-
E-1D
tween patterns during repeat sewing.
246
Error
Errors E-1C and E-1D are not displayed due to mechanical problems.
BES-962BC • BES-1262BC
This is not usually displayed.
Turn the power off and on once. If the same error occurs again, the home
position sensor is faulty.
Press the
or turn on the F/B switch on the head to either side to restart
STOP
the home position detecting movement again.
This is not usually displayed.
Adjust the pulley stop position (100 degrees) above the needle and press
the
or turn on the F/B switch on the head to either side.
STOP
This is not usually displayed.
Press the
or turn on the F/B switch on the head to either side. If the
STOP
same error occurs again, the color change mechanism is faulty.
This is not usually displayed.
Turn the power off and on once. If the same error occurs again, the X-axis
mechanism is faulty.
After passing through the thread, press the
the head to either side.
This is not usually displayed.
Turn the power off and on once.
This is not usually displayed.
Turn the power off and on once. If the same error occurs again, the Y-axis
mechanism is faulty.
Hoop movement restarts if you press
This is not usually displayed.
Turn the power off and on once after checking to see that the connector of
the X-axis stepping motor is properly connected.
This is not usually displayed.
Tracing is cancelled if the
STOP
during mask tracing. Press the
This is displayed when the stop switch is pressed while the hoop is moving.
Press the
to move the hoop again. (It is necessary to press the
again to start sewing.)
Measures
or turn on the F/B switch on
STOP
.
key is pressed when the machine is stopped
key to continue tracing.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bes-1262Bes-962Bes-1262bc

Table of Contents