Chapter 6 Embroidering
Running Other Programs
Other programs can be started when the machine power is not turned on or when the machine is in
operation for embroidery.
1.
Selecting [Embroidery Data Edit Individual Start]
188
The following programs can be started:
Embroidery data explorer
Embroidery data editor
Production report
Select [Embroidery Data Explorer independently] or [Embroidery Data
Editor independently] from Tool menu.
Input the number of needle bars. Input the number according to your machine
specifications. Click [OK].
BES-962BC • BES-1262BC
Allows transfer and copy of the embroidery data.
Data transfer to the machine controller is not allowed.
Allows editing of embroidery data.
Allows display and print-out of production data, etc.
Click this to increase or decrease the value.